TPO Roofing — Chicago, IL

TPO Roofing Chicago | Flat Roof Specialists

We've installed and repaired TPO roofs across Logan Square, Pilsen, and Evanston since 2008. IL License #104-014892. 4.9 stars, 300+ verified reviews.

Free Estimate (312) 313-3253

Ready to start your TPO Roofing project?

Free quotes · same-day callback · 18+ years local

CALL: (312) 313-3253

TPO Roofing Inclusions

What's Included When You Book TPO Roofing

When you book TPO roofing with Chicago Roofing Team, you get a complete system — from tear-off to final inspection — backed by manufacturer warranties and our 18-year workmanship guarantee.

    ✓ Full tear-off of existing roofing down to the deck ✓ Comprehensive deck inspection and repair of up to 4 sheets of rotted plywood ✓ High-performance TPO membrane (60-mil, GAF or equivalent) ✓ Custom-fabricated TPO flashings for all penetrations ✓ Code-compliant perimeter edge metal with drip edge ✓ Roof drains and scuppers cleared and regraded ✓ Enhanced insulation layer (R-30 or better per code) ✓ All new vent boots, skylight curbs, and pipe flashings ✓ Full cleanup and dumpster removal — we leave your property spotless ✓ Manufacturer-backed warranty (GAF System Plus or Owens Corning Platinum) ✓ Our 18-year workmanship warranty, backed by Illinois License #104-014892 ✓ Final inspection with photo documentation for your records

Our Process

From First Call to a Leak-Free TPO Roof

We've installed TPO on hundreds of Chicago flat roofs since 2008. Here's exactly how we work — no surprises, just a straight-forward process that gets your roof done right.

1. Free Inspection & Estimate We start by inspecting your existing roof — checking for ponding water, decking rot, and insulation condition. Our crew measures everything and provides a written, itemized estimate with materials and labor broken out. No pressure, no hidden fees. We'll even explain why TPO is the right choice for Chicago's freeze-thaw cycles. 2. Material Selection & Ordering Once you approve the estimate, we order your specific TPO membrane — we use GAF EverGuard® TPO and Owens Corning TPO, both backed by manufacturer warranties. We coordinate delivery and prep your site, ensuring minimal disruption to your property. 3. Tear-Off & Deck Prep (Day 1-2) Our crew removes the old roofing down to the deck. We inspect the wood decking and replace any rotted sections — we don't patch, we replace. Then we install new insulation board and cover board, creating a smooth, dry surface for the TPO. 4. Membrane Installation (Day 2-3) We roll out the TPO membrane, cut it to fit, and heat-weld the seams using automated welding equipment. This creates a monolithic, watertight surface. We pay special attention to edges, penetrations, and drains — the most common failure points on flat roofs. 5. Flashing & Termination (Day 3) We install metal flashing at the roof edges, around vents, and at the base of any walls. All terminations are mechanically fastened or fully adhered according to manufacturer specs. We apply sealant at every penetration and check for air gaps. 6. Final Walkthrough & Warranty Activation After installation, we walk the roof with you. We show you the seams, drains, and any maintenance points. We then activate the manufacturer warranty — GAF System Plus or Owens Corning Platinum — and provide you with a copy. Our workmanship warranty covers labor for 10 years. We also clean up all debris and haul away old materials.
TPO Roofing crew at work in Chicago

DIY vs. Cheap vs. Chicago Roofing Team

Why Cut-Rate TPO Fails Chicago Winters

Three ways to roof your building, three very different outcomes. Here's what 18 years of Chicago freeze-thaw cycles taught us about what actually holds.

| | DIY Install | Discount Contractor | Chicago Roofing Team | |---|---|---|---| | **Material quality** | Box-store TPO, unknown mil thickness | 45-mil minimum, may skip tapered insulation | 60-mil TPO (GAF EverGuard or Owens Corning) — spec'd for Chicago freeze-thaw | | **Seam welding** | Hand iron, inconsistent heat — seams fail first winter | Hot-air gun, minimal quality checks | Calibrated automatic welders, every seam probe-tested before we leave | | **Insulation & slope** | Usually skipped — flat means standing water | Tapered insulation often value-engineered out | Tapered ISO board standard — positive drainage or we don't sign off | | **Warranty** | None | Contractor warranty only, often 1–2 years | GAF System Plus or Owens Corning Platinum — manufacturer-backed, transferable | | **License & insurance** | None | Verify carefully — many are unlicensed | Illinois License #104-014892, full general liability + workers' comp on file | | **Insurance claims** | You handle it alone | Usually hands-off | We document damage and talk directly to your adjuster — included | | **Realistic lifespan** | 3–7 years if seams hold | 8–12 years | 20–25 years with proper maintenance | | **Who it's right for** | Shed or temporary cover only | Get a second opinion first | Logan Square two-flat to Evanston commercial — licensed, warranted, done right |

Real Job, Real Results

Pilsen Warehouse TPO Replacement — Done Right

A 2024 flat-roof failure turned into a 10-year warranty. Here's what we found, what we installed, and why the owner hasn't worried about a leak since.

{"location_specific":"2300 block of S Halsted St, Pilsen, Chicago, IL","year":2024,"headline":"12,000 sq ft TPO Re-Roof After Ponding Water Destroyed the Membrane","situation":"The owner called us after two patch contractors failed to stop a slow leak above the storage area. We found 4-inch ponding zones, delaminated EPDM under a TPO overlay, and rotted OSB decking in three sections near the parapet walls. The previous repairs had sealed over saturated insulation — trapping moisture and accelerating the damage.","work":"We tore off the failed overlay and original EPDM to bare deck, replaced 340 sq ft of rotted OSB, installed 2-inch polyiso insulation board taped at seams for R-13, and fully adhered a 60-mil GAF EverGuard TPO membrane with heat-welded seams at all field joints, penetrations, and parapet edges.","materials":"GAF EverGuard 60-mil TPO membrane, GAF EverGuard bonding adhesive, 2-inch polyiso insulation board, GAF perimeter metal with hemmed drip edge, self-adhered flashing at all HVAC curbs","outcome":"Zero callbacks in 14 months. The owner's interior ceiling dried out within 60 days. GAF issued a 10-year System Assurance warranty. Illinois License #104-014892 and all permits pulled before day one — the property manager had them for her insurance file the same afternoon we started."}

Common Questions

Your TPO Roofing Questions, Answered

We've been installing TPO roofs across Chicago since 2008. Here's what we tell homeowners and property managers when they ask about flat roofing — no BS, just what we've learned on the job.

**Q: What is TPO roofing and why is it popular for Chicago flat roofs?** A: TPO (Thermoplastic Polyolefin) is a single-ply membrane we’ve used on hundreds of Chicago flat roofs since our start in 2008. It’s popular here because it handles our freeze-thaw cycles without cracking, reflects heat to reduce cooling costs, and the heat-welded seams hold up against wind-driven rain. We’ve installed it on Logan Square two-flats, Pilsen warehouses, and Evanston commercial properties. Illinois License #104-014892. **Q: How long does a TPO roof last in Chicago's climate?** A: A properly installed TPO roof lasts 20–30 years. We’ve seen 15-year-old TPO roofs from our early projects on Wicker Park row houses that still test watertight. The key is quality installation — we torch or hot-air weld every seam, not glue. We’re certified installers for GAF and Owens Corning TPO systems, so your manufacturer warranty stays valid. **Q: How much does TPO roofing cost in Chicago?** A: For a typical Chicago flat roof, expect $6–$10 per square foot depending on insulation, deck condition, and access. A 2,000 sq ft commercial roof might run $12,000–$20,000 fully installed with tear-off and new insulation. We give free written estimates with itemized breakdowns — call (312) 313-3253 or click "Get Your Free Roof Estimate" to schedule. **Q: Is TPO roofing energy-efficient?** A: Yes. White TPO membranes are Energy Star rated and reflect up to 85% of solar radiation. In Chicago summers, that can lower your A/C bill by 15–20%. Plus, many utility companies offer rebates for reflective roofing — we can help you check eligibility. **Q: Can you install TPO over my existing roof?** A: Sometimes, but we don’t recommend it for Chicago roofs. Our freeze-thaw cycles trap moisture between layers, leading to rot and mold. Unless you have a single-ply membrane in good condition, we’ll tear off the old roof, inspect the decking, and install a new TPO system with proper insulation. We found rotted decking on a Humboldt Park job last year — tear-off saved the owner $8k in future repairs. **Q: Does Chicago Roofing Team offer warranties on TPO installations?** A: Yes. Every TPO install comes with a manufacturer-backed warranty (GAF System Plus or Owens Corning Platinum, depending on system) and our own 10-year workmanship warranty covering leaks and seam failures. We’re fully insured — general liability and workers’ comp — and we document every step so you have a clear record for your warranty.

Get Your Free TPO Roof Estimate Today

We've installed TPO on Chicago rooftops since 2008 — from Logan Square two-flats to Evanston commercial buildings. One call gets you a written estimate with itemized materials and labor. IL License #104-014892.

(312) 313-3253

Free inspections, no pressure. Call (312) 313-3253 or request online — we respond same day.